The exact oil filter part number for a 2018 Kia Sportage varies by engine and market; there isn’t a single universal number for all models. The two common engine options in many regions are the 2.4-liter GDI and the 2.0-liter turbo, each using a different filter.
For the 2018 Sportage, Kia offered at least two gasoline engines in many markets—the 2.4-liter inline-4 GDI and the 2.0-liter turbocharged inline-4—so the correct filter number depends on which engine your vehicle uses and where it was sold. To be certain, verify the engine code or VIN and consult Kia’s official parts catalog or your local dealership.
Engine options for the 2018 Sportage
Understanding which engine your Sportage has is the first step in identifying the correct filter. Two main gasoline engines were commonly available in many markets for that model year.
- 2.4L inline-4 GDI engine
- 2.0L turbocharged inline-4 engine
Note: Availability of engines can vary by country and trim level. If you’re unsure which engine is in your vehicle, check the owner’s manual, the service sticker under the hood, or your vehicle’s VIN to confirm the exact specification.
Determining the exact oil filter part number
To obtain the precise part number, use a method that cross-references your exact vehicle configuration rather than relying on memory or a generic listing.
- Locate your Vehicle Identification Number (VIN). It is typically found on the driver’s side dashboard near the windshield or on the driver’s door jamb.
- Use Kia’s official parts lookup or request a VIN-based parts search at a Kia dealership. Enter the model year (2018), Sportage, and your engine type to pull the correct oil filter part number.
- Cross-check with the currently installed filter if you are replacing a used part—the numbers are often stamped or printed on the filter itself.
- If you prefer aftermarket options, verify compatibility with your engine and confirm the filter’s fitment by using a reliable cross-reference tool or consulting the retailer’s compatibility guide.
- When in doubt, call or visit a Kia dealership to confirm the exact part number for your market and VIN.
Confirming the exact part number through an official source helps prevent ordering errors and ensures proper filtration and fitment for your engine.
Why the numbers vary
Engine type, regional specifications, and even production changes can lead to different oil filter part numbers for the same model year. Always verify with a VIN-based lookup to account for these variables.
Maintenance and installation tips
When replacing the oil filter, ensure you also use the recommended oil type and quantity for your engine, replace the oil drain gasket if applicable, and hand-tighten the filter plus a final gentle snug with a filter wrench if required by the design.
Summary
For a 2018 Kia Sportage, there isn’t a single oil filter part number. The right number depends on the engine (2.4L GDI or 2.0L turbo) and the market. The most reliable way to obtain the exact part number is to look up the vehicle by VIN using Kia’s official parts catalog or consult a dealership. If you share your engine type or VIN, I can help guide you to the precise part number.
What is the oil filter number for a 2018 Kia Sportage?
OEZ by Premium Guard – Oil Filter: Ideal for Any Type Oil, Same Filter Installed From The Factory (Part No. 26300-35505)
What does 04152 YZZA1 fit?
Oil Filter 04152-YZZA1 Fit Toyota Avalon Camry Sienna Lexus RX350 ES350 Scion 5X. -2011-2016 Scion TC 4Cyl. 2.5L 2AR-FE Engine. -2007-2017 Lexus ES350 V6 3.5L 2GR-FE Engine.
What does the PF2232 oil filter fit?
ACDelco PF2232 Engine Oil Filter Fits select: 2001-2019 CHEVROLET SILVERADO, 2001-2019 GMC SIERRA.
What oil does a 2018 Kia Sportage take 5W30?
Mobil 1 – High Mileage 5W-30 Full Synthetic Motor Oil, Protection For 10K Miles, 5 Quart (Part No. 120769)


